Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 40.0508620689655 z = -1.32034482758621, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 44.2706896551724 z = -3.00827586206896, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 352 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1055 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 40 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 40.0508620689655 z = -1.32034482758621, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 44.2706896551724 z = -3.00827586206896, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 350 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 910 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 40.0508620689655 z = -1.32034482758621, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 44.2706896551724 z = -3.00827586206896, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 353 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 910 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 335 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1008 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 40 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 335 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 868 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 338 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 868 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z1)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 40.2596251273958 z = -1.37659388351431, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1013 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 40 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 40.2596251273958 z = -1.37659388351431, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 873 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 40.2596251273958 z = -1.37659388351431, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 873 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z2)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 44.546368654355 z = -3.10459306799649, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 333 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1013 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 40 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 44.546368654355 z = -3.10459306799649, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 874 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 44.546368654355 z = -3.10459306799649, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 874 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z3)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 44.5507287922988 z = -3.1040006190847, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 331 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1018 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 39 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 44.5507287922988 z = -3.1040006190847, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 331 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 877 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 44.5507287922988 z = -3.1040006190847, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 331 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 877 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z4)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 43.7012335169382 z = -2.75461528278113, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1017 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 39 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 43.7012335169382 z = -2.75461528278113, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 876 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 43.7012335169382 z = -2.75461528278113, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 332 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 876 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 31 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z5)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 44.5637911415897 z = -3.10219689547952, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 329 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1025 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 38 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 44.5637911415897 z = -3.10219689547952, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 328 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 883 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 30 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 44.5637911415897 z = -3.10219689547952, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 328 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 883 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 30 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z6)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 43.6939245166224 z = -2.73824229372616, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 327 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1029 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 36 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 43.6939245166224 z = -2.73824229372616, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 326 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 887 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 28 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 43.6939245166224 z = -2.73824229372616, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 326 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 887 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 28 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z7)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s):  A slice is beyond the geometry at x = 43.6901938723486 z = -2.72989179606924, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 327 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1032 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 35 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s):  A slice is beyond the geometry at x = 43.6901938723486 z = -2.72989179606924, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 326 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 890 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 27 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s):  A slice is beyond the geometry at x = 43.6901938723486 z = -2.72989179606924, so a valid soil could not be determined., , 
Warning: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 326 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 890 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 27 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z8)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 326 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 1015 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): 34 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_1_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 325 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 893 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): 26 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_2_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., , 
Warning: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): The driving moment of slip plane 15 is too small. No safety factor can be calculated., , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 325 sliding curves were not calculated, because they do not intersect with the subsoil, , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 893 sliding curves were not calculated, because their entry or exit point is higher than the circle center, , 
Info: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): 26 sliding curves were not calculated, because they circle center is below the surface line, , 
Error: Loc(13-2-1-B-2-Z9)_Sce(1)_Pro(13-2-1-B-2-Z_3_s): Could not load file or assembly 'DGeoSuite.Components.Persistence, Version=2022.2.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified., ,